WE SELL DRY BILGES!
the dry bilge machine
Arid Bilge Series 4 Unit Specifications
Available in 3 and 4 zone configurations
Height - 15 inches / 38 centimeters
Width - 9 inches / 23 centimeters
Depth - 7.5 inches / 19 centimeters
Dry weight - 15 pounds / 7 kilograms
Intake tubing - 3/16" diameter in 20 to 70 foot lengths
Unit Maximum Expected Flow Rate - 10 US gallons / 39 liters per hour
Power - 12 volt DC standard, 24 volt DC optional
Power draw - 0.09 amp (90 milliamps) average standby draw, 0.8 amps average run draw at 12 volt DC with one active zone
Height - 15 inches / 38 centimeters
Width - 9 inches / 23 centimeters
Depth - 7.5 inches / 19 centimeters
Dry weight - 15 pounds / 7 kilograms
Intake tubing - 3/16" diameter in 20 to 70 foot lengths
Unit Maximum Expected Flow Rate - 10 US gallons / 39 liters per hour
Power - 12 volt DC standard, 24 volt DC optional
Power draw - 0.09 amp (90 milliamps) average standby draw, 0.8 amps average run draw at 12 volt DC with one active zone
Pictured on left is the Series 4 with a white case and on right with a black case.
Intake - 3/16" Alkon push lock fittings.
Intake tubing - 3/16" Mazzer Polyethylene tubing, 200 feet provided.
Single point discharge - 1/2" barbed fitting, normally connected to a 1/2" Polybraid hose, most discharges are then T connected to a sink, deck or existing bilge pump thru hull fitting.
Control: PLC Direct Logic 05 Koyo D0-05 processor, software proprietory.
Compressor / vacuum pump: Thomas
Intake valves: N.C. Asco solenoid type.
Main unit material: Air injected PVC plastic available in white or black case
Face: Clear Fire Resistant Lexan 9600 with graphics
Limited warranty: one year parts and labor.